-
MILLER ELECTRIC Inlet Guide, 2 and 4 Roll,023-.040
Inlet Guide, 2 and 4 Roll,023-.040
$31.80$37.99MILLER ELECTRIC Inlet Guide, 2 and 4 Roll,023-.040
$31.80$37.99 -
Miller Electric Limit Switch 10A 125/250VCD (183629)
Limit Switch 10A 125/250VCD
$31.12$32.69Miller Electric Limit Switch 10A 125/250VCD (183629)
$31.12$32.69 -
Miller Electric Replacement Grinding Retaining Clip,PR
Replacement Grinding Retaining Clip,PR
$12.09$13.80 -
Erie AG13A02A Actuator 24V 18″ Leads, 1″ x 1″ x 1″
Includes auxiliary
Synchronous motor drive with spring return.
Mounts directly onto the body without the need for linkages or calibration.$66.00 -
Sigma Electric, Gray Sigma Engineered Solutions ProConnex 02-51026 Rigid Service Entrance Ell 3/4-Inch Conduit Fitting, 1-Pack, Size
Connects lengths of 3/4-in Rigid conduit or IMC
Mounts flush against structures
Features removable die-cast cover and fiber gasket that allows access to the interior of the raceway$7.76 -
Sigma Electric, Silver Sigma Engineered Solutions Proconnex 49204 Rigid Nipple 1-Inch Conduit Fitting, 1-Pack, Size
Connects two boxes or metal enclosures with threaded knockouts
Compatible with 1-in knockouts
Locknuts required (not included)$7.49 -
Sigma Electric, Silver, Size Sigma Engineered Solutions Proconnex 49209 Rigid Nipple 2-Inch Conduit Fitting, 1-Pack
Connects two boxes or metal enclosures with threaded knockouts
Compatible with 2-in knockouts
Locknuts required (not included)$7.59 -
Sigma Engineered Solutions ProConnex 02-54074 Rigid Watertight Conduit Hub 1-1/2-Inch Conduit Fitting, 1-Pack
Terminates 1-1/2-in Rigid threaded conduit or IMC to an enclosure
Assembled with a 90-degree Celsius rated insulator and rubber sealing ring
Zinc die-cast construction$12.52 -
ERIE CONTROLS AG23B020 and 18″ Wire Leads, Motor, Actuator, Spring Return, Two Position, Normally Open, 120 VAC
Erie 120V General Purpose Normally Open Actuator Without End Switch AG23B020 Erie’s PopTop motorized hydronic valves provide convenient, reliable and easy installation for a variety of heating and
Installation is a snap with easy, one-handed removal or engagement of the actuator to the valve body
Push the button and lift$64.99 -
Sigma Engineered Solutions ProConnex 02-51028 Rigid Service Entrance Elbow Conduit Body – Type LB, 1-1/4-in
Connects lengths of 1-1/4-in Rigid conduit or IMC
Mounts flush against structures
Features removable die-cast cover and fiber gasket that allows access to the interior of the raceway$12.67 -
Speed Bully Motor Fan Speed Controller 120V, Variable Speed Controller for Electric Motor, Fans, Pumps, Routers, AC & DC Motors, Inline Duct Fan Controller, Perfect AC Motor Speed Control
Works with most fans, pumps, routers & most AC/DC Motors 15 AMPS or less
Overload Protection – The variable speed motor controller is equipped with a fuse to protect you and your electronics in the power supply is overloaded, or short circuits.
Full Control – Gain complete control over your inline duct fans to product the perfect airflow by operating your fan anywhere from 0 to Max RPM$33.43 -
Sigma Engineered Solutions ProConnex 48200 EMT Insulating Bushing 1/2-Inch Conduit Fitting, 4-Pack
Provides a smooth end to protect wires or cables
For use with 1/2-in EMT
Meets NEC requirements$5.08 -
Sigma Engineered Solutions ProConnex 49324 Rigid Plastic Insulating Bushing 1-1/4-Inch Conduit Fitting, 1-Pack
Provides a smooth surface that protects wires
Used on the end of 1-1/4-in Rigid conduit, IMC or other threaded connectors
Thermoplastic construction$4.24 -
Sigma Engineered Solutions ProConnex 49328 Rigid Plastic Insulating Bushing 3-Inch Conduit Fitting, 1-Pack
Provides a smooth surface on the end of conduit to protect wires
Used on the end of 3-in Rigid conduit, IMC or other threaded connectors
Thermoplastic construction$5.64 -
Sigma Engineered Solutions ProConnex 48202 EMT Insulating Bushing 3/4-Inch Conduit Fitting, 4-Pack, Gray
Provides a smooth end to protect wires or cables
For use with 3/4-in EMT
Meets NEC requirements$6.15 -
Sigma Engineered Solutions ProConnex 49007 EMT EMT-to-Box Offset Set Screw Connector, 3/4 in
Terminates 3/4-in EMT conduit to a 3/4-in knockout in an outlet box or enclosure
Features 3/4-in offset connection
Set screw type connection onto EMT conduit$5.95 -
ABB THQLLX1 Generator Interlock Kit for PowerMark Gold™ Load Centers • for 150-225 Amp Main Breaker Panels • Safety Interlock & Installation Hardware for Seamless Generator Integration
COMPLETE CONVERSION KIT FOR EASY TRANSITION – This THQLLX1 kit contains all necessary components to convert your 150-225 Amp PowerMark Gold load center into a generator panel, facilitating seamless and safe energy management during power outages.
ADVANCED SAFETY FEATURES FOR DUAL POWER SYSTEMS – The interlock mechanism ensures that the main utility and generator breakers cannot be turned on simultaneously, enhancing safety by complying with the most stringent electrical standards.
DESIGNED SPECIFICALLY FOR VERTICAL LOAD CENTERS – Optimized for vertical PowerMark gold load centers with a left-right handle orientation, this kit includes a durable stainless-steel interlock device, auxiliary main breaker retainer, and all required assembly hardware.$58.32$84.72 -
UBIP115 Pushmatic P115 Replacement. 1 Pole 15 Amp Circuit Breaker by Connecticut Electric. (UBIP-115)
Replacement Pushmatic circuit breaker manufactured new by Connecticut Electric
For use in Pushmatic circuit breaker panels
Intertek ETL Listing to UL Standard 489 for US and Canada-Molded case circuit breakers$22.75$29.68
Shop By Department
